TROUBLESHOOTING

Jun 20, 2019  LoudMiner is an unusual case of a persistent cryptocurrency miner, distributed for macOS and Windows since August 2018. It uses virtualization software – QEMU on macOS and VirtualBox on Windows – to mine cryptocurrency on a Tiny Core Linux virtual machine, making it cross platform. It comes bundled with pirated copies of VST software. The miner itself is based on XMRig (Monero). What is the correct way to use Neutron? I have a track that has about 18 stems, 10 of which are running Omnisphere 2. I placed an instance of Neutron on each stem, and shortly my CPU usage jumped to 99% (highest I've seen is 10-11%).

Omnisphere 2. 6 Cpu Usage Free

If your CPU load climbs too high, you will hear clicks, pops or stuttering in the live audio. This is known as a buffer underrun. The good news is, CPU load be lowered if you take the time to make some adjustments to FL Studio as shown below.

Why do underruns happen? - Live audio is pre-rendered in small chunks that are then sent to your audio interface. The Buffer length decides how long these chunks are. The purpose of pre-rendering is to even out momentary spikes in CPU load, when your computers ability to generate audio is slower than 'real-time'. In this case, some of the buffered audio can be used while real-time processing catches up. If the buffer runs out, because your CPU can't keep up with real-time for too long, then your audio device will start crackling or stuttering.

Underruns only matter during real-time playback - Loading projects and plugins will cause underruns and so the total count should not bother you. Underruns also can't occur in exported wave or mp3 files as the render process can take as long as it needs to generate audio. If you do hear glitches in an exported audio, then it's a plugin behaving badly. Further information is available in the FL Studio Optimization YouTube playlist.

First settings and things to check

Some very important settings are located on Options > Audio:

1. Audio settings (drivers)
   • Windows, one of the most important settings is to select an ASIO audio device driver from the Input / output menu. Look first for the native ASIO driver that installed with your audio device OR if one is not available use the Image-Line FL Studio ASIO. Whichever driver you use, download the latest from your audio device manufacturer.
   • macOS - Try Aggregating your audio interface. This can improve unsolvable crackling issues, particularly during recording.

   NOTE:Do not connect your audio device through a hub. Use a direct USB port connection.

2. Increase the audio buffer length - For Windows and macOS, make sure the Buffer length setting is not less than 10 ms (441 samples). The Buffer length setting is found on the Audio settings page. For Windows you will need to click the 'Show ASIO panel' button there, to see the settings if you are using an ASIO driver (as you should be!). Starting from 10 ms (441 samples) keep adding 5 ms (220 sample) increments until you notice a drop in CPU usage. But there are limits, buffer lengths over 40 ms (1764 samples) make live playing difficult and will probably not help CPU usage. NOTES:

   The graph shows why very short buffers are bad, and very long buffers don't help - In this example the minimum time needed to generate audio for the project is 50% of real-time. That is, no matter how long the buffer, the computer needs half the buffer-time to generate the audio to fill it. Longer buffers don't come for free, as more audio needs to be generated to fill them. Short buffers are a problem because there is a minimum time that can't be crossed without the CPU falling behind real-time. As the buffer is reduced, processing overheads become an increasingly large proportion of the workload and the CPU meter climbs rapidly, usually below 10 ms, as the theoretical minimum buffer length is approached. Conversely, longer buffers simply converge on the minimum possible buffer-fill-time, in this case 50%.

   NOTES: The graph is based on the assumption the processing overhead is 1 ms and the buffer-fill-time is 0.5 x Buffer Length (ms). For an explanation on how the FL Studio CPU meter is different from the OS CPU meter, see here. Quoted sample latencies assume a sample rate of 44100 Hz.

3. Is your CPU running at full speed? Do you have some wimpy energy saving/CPU throttlingmode engaged. If you are serious about your music production then you will be prepared for, at least, some melting of the polar ice caps. See:
   • Windows - 'Start > Settings > Control panel > System & maintenance*** > Power Options'. *** Whether or not this sub-menu shows depends on your windows settings. Set your power management to 'High performance mode'. If you are running a Laptop/Tablet CPU and experiencing unexpected audio glitches or CPU spikes, try Advanced Settings and set Minimum / Maximum processor state to 99%. This can prevent the system going into turbo CPU mode, and then thermal throttling which causes issues. Finally, ALWAYS use a laptop connected to the power supply.
   • macOS - Open 'System Preferences > 'Energy Saver' > (available option depends on your Mac model) Set 'Computer sleep' slider to 'Never' OR Check the box 'Prevent computer from sleeping automatically when the display is off'. Un-check 'Put hard disks to sleep when possible' and 'Enable Power Nap'. Laptops: Open System Preferences > Energy Saver > Un-check automatic graphics switching. Finally, ALWAYS use a laptop connected to the power supply.
4. Problem plugins - Check the Plugins behaving badly page in the manual. You may be able to identify CPU intensive plugins with the Plugin performance monitor.
5. Bridged plugins - Make sure you are not bridging plugins unnecessarily. There are two common causes:
   • VST library mismatches - Make sure you are using plugins that match your version of FL Studio (32 or 64 Bit). Some people switch to FL Studio 64 Bit while their VST library is still 32 Bit OR they unnecessarily run the 32 Bit version on a 64 Bit system with mainly 64 Bit plugins. If FL Studio can't find 64 Bit equivalents of the plugins it will bridge 32 Bit versions to 64 Bit mode and vice versa. This uses more CPU than 32 Bit plugin on FL Studio 32 Bit or 64 Bit plugins on FL Studio 64 Bit.
   • Incorrect Wrapper settings - Make sure you don't have Wrapper Processing > Make bridged activated where it is not needed or intended. The wrapper remembers settings, so deselect it for each plugin with Autosave activated. Bridging uses about 2% extra per plugin, so a couple won't matter but 10+ definitely will. Bridged plugins may also just behave badly causing pops, glitches and possibly crashes. Make sure to install 32/64 Bit versions of ALL plugins to match FL Studio. For more details see FL Studio 32 vs 64 Bit FAQ
6. Time stretching > Mode > Stretch - If you have a lot of Audio Clips set to this mode, they will consume far more CPU than when set to Resample. Generally, you should only use 'Stretch' mode for Clips that span a Tempo change. Otherwise, use offline stretch modes.
7. Multithread support - Make sure Multithreaded generator processing and Multithreaded mixer processing are selected on the Audio Settings panel AND if you are using VST plugins, 'Allow threaded processing' is selected on the Wrapper.
8. Smart Disable - Enable Smart disable on the Audio Settingsand then run the Tools Menu > MacrosSwitch smart disable for all plugins. This will disable effects & instruments when they are not making any sound and can decrease CPU usage significantly. If this global option causes issues with any plugins it can be disabled for those individual plugins using the wrapper menu setting 'Smart disable'. NOTE: Smart Disable is active only during live playback, it is temporarily disabled when rendering.
9. Create multi-core compatible projects - Make sure that your highest CPU using plugins are routed to independent Mixer Tracks without shared 'Send' Channels. Multi-core CPUs need computational tasks that can be run simultaneously and so split across cores. Each Mixer Track represents an 'opportunity' to create these independent, parallel, processing paths. Each unit in the audio chain from the instrument through to the Mixer track and the effects must be processed in sequence on the same core. If one mixer track is linked to another, then all the instruments and effects on both Mixer Tracks now have a dependency and can't be split across cores efficiently. Symptoms of this situation are audio glitches as individual cores max-out and cause underruns while the overall CPU load still appears to be low.

Optimization Checklist

Quick reference list for CPU optimization...

1. Update to the latest version of FL Studio. We made some dramatic improvements to CPU load starting with FL Studio 20.0.4 and more since then.
2. Set these Audio Settings to ensure maximum performance:
   • Buffer length - Make sure your buffer is not less than 10 ms (441 samples). We recommend between 10-40 ms.
   • Playback tracking - If not already set, try Mixer, Hybrid and Driver. Mixer can help particularly in cases where there is a misalignment between the audio and playback position or strange playhead jumpiness.
   • Mixer Interpolation - Should be set no higher than 24 point sinc (lower is better).
   • Sample rate - Set to 44,100 Hz (or 48,000 Hz if that is not available). Sample rates such as 192 kHz and 96 kHz, will use significantly more CPU than the recommended default of 44.1 kHz.
   • Reset plugins on transport - Make sure 'Reset plugins on transport' is disabled as this can cause significant glitching on start/stop events when using VST plugins.
   • Priority - Set to 'Highest' and deselect 'Safe overloads' (don't worry, an 'unsafe' overload will just lock up interface controls momentarily).
   • ASIO Options - Try the Mix in buffer switch and Triple buffer options. NOTE: If these do not help, make sure to deselect them again before proceeding.
3. Smart Disable - Enable Smart disable on the Audio Settingsand then run the Tools Menu > MacrosSwitch smart disable for all plugins.
4. Consolidate patterns - Check for your highest CPU usage plugins using the Plugin Performance Monitor and use the Playlist Track (header) Right-Click menu option 'Consolidate this track' to convert your highest CPU usage patterns to Audio Clips.
5. PPQ setting (Pulses Per Quarter note) - The PPQ setting sets the 'event' resolution for the project. That is, how finely the Piano roll and Playlist grid is divided for processing by FL Studio. This affects the smallest movements and so sampling of notes, clips and automation. Settings above 192 PPQ can have a significant impact on CPU load. Generally use 96 PPQ unless you need the extra temporal resolution.
6. For projects heavy with audio-tracks - Turn OFF 'Keep on disk' for any Sampler and Audio Clip channels. This ensures samples are pre-loaded into memory avoiding underruns caused by disk-to-RAM swapping delays OR zoom out the Playlist, (Ctrl + Right-Click) on a blank area, so all Audio Clips are visible prior to pressing Play. This forces Audio Clip data to be cached into RAM.
7. Reduce the plugin count - Try to reduce the number of plugins (instrument and FX). These are the most CPU hungry parts of the program.
8. Limit Polyphony - Use the maximum polyphony setting to reduce the maximum polyphony of channels (see MiscellaneousChannel Settings). This often reduces dramatically CPU usage in complex melodies. You can still set FL Studio to ignore the maximum polyphony settingswhen exporting to wave/mp3 file (see Exporting to .wav/.mp3/.mid).
9. Disable MIDI - Disable all the 'Enable MIDI...' options using the Options menu as MIDI processing uses CPU resources even when not in use.
10. Playlist sluggishness - Try disabling 'Playlist menu > View > Keep labels on screen'. Mac users see here.
11. Plugins behaving badly - See this section of the manual.

System related issues

• Competing & background programs - Close all non-essential programs that may be competing for resources, e.g. Instant messaging programs (AIM, MSM/WLM, Skype, Yahoo! Messenger), torrents, web browsers, audio/video players, etc. If you experience intermittent issues, check for scheduled activity like virus scans, backups, windows updates, disk defragmentation, even Wi-Fi & Blue-Tooth adapters have been known to cause issues, particularly if they are constantly re-making flaky connections.
• Hardware issues - Unplug unused HDMI, USB, BlueTooth & FireWire devices if you are experiencing unexpected CPU spikes and glitches to discount these as causes. Also don't overlook cooling issues and thermal throttling of your CPU. When was the last time you blew the dust out of your computers cooling ventilation system/s?
• Driver issues - Update your Audio driver, Video driver and Motherboard BIOS in that order, checking each time if the issues go away. Make sure to use the latest driver from the manufacturers website for your operating system.
• Extend your memory - Check the manual page on the CPU & Memory panel. Adding more physical RAM can improve responsiveness where data was previouslysaved in the Page File. This is only likely to help if you are using 4 GB or less.
• CPU performance check - Search for your CPU's performance score on CPU Benchmark. Here's how we grade scores:
  • Weak - 4,999 or less.
  • Medium - 5,000 to 9,999.
  • Strong - 10,000 to 14,999.
  • Very strong - 15,000 or more.

  If your CPU is in the 'weak' or 'Medium' categories, show it respect, don't throw 30+ high-cpu load plugins at it and wonder why it chokes. Audio processing, as performed by DAW software, is one of the most CPU intensive tasks done in real-time on computers today. It's more CPU intensive than 3D games, that offload a lot of work to the video card GPU. Each audio stream needs real-time calculation of at least 44100 samples PER second multiplied by the number of plugins you are running multiplied by their own internal shenanigans. But, all hope is not lost, limitations breed creativity, work with what you have and rejoice in the democratization of modern music production. If you would like to upgrade your system, we have a detailed Knowledge Base article here on Building an Audio Production ready computer.

Psychology Reality Check

Having the lowest Buffer length setting is not a competition. If you are happy with 20 or 30 ms then that's great. Remember, the lower the buffer length setting, the higher the CPU load. We strongly recommend 10 ms (ASIO mode) as a minimum setting. At lower settings than 10 ms, most people don't experience improved 'responsiveness' and the CPU load climbs rapidly. To put 10 ms in context, the delay between touching a key on a real piano and the hammer hitting the strings for a 'pianissimo' note can be well over 100 ms (Touch and temporal behavior of grand piano actions; Goebl, Bresin & Galembo [2005]), something to ponder.

Omnisphere 2. 6 Cpu Usage Download

19.2.2020 Update: Correction No. 3
Year / Date of Issue : 19.2.2020
Version : 20.6.2.1549
Developer : Image-Line
Developer’s site : Image-line
Bit : 32bit, 64bit
Interface language : English
Tabletka : present Patch
System Requirements : Windows 10 / 8.0 / 8.1 / 7
4GB free disk space
4GB of RAM or higher recommended
Soundcard with DirectSound drivers. ASIO / ASIO2 compatible required for audio recording (FL Studio installs with generic ASIO4ALL drivers)

Description : FL Studio is a new version of the best program in the world for creating your own music, with it you can create your own tracks of any style, also record vocals to mix it, edit, cut, change and even a million different functions for working with sound.
It is a complete music software, which is more than 14 years of innovative development. Everything you need in one package to compose, arrange, record, edit, mix. FL Studio is the fastest way from your brain to your speakers.
Now the program interface is easy to scale for any screen resolution of your monitor. New, more convenient installation sorting and launching VST plugins and tools. New tabs and categories have appeared in the browser, as well as the ability to delete content with the right mouse button.

[No. 3]19.2.2020 Fixed: When adding tracks from the main menu, the message ” Please consider purchasing legitimate copy … “

Omnisphere 2. 6 Cpu Usage Chart

[No. 2]15.2.2020 Fixed: The online panel is being removed, but … is returning

[No. 1]15.2.2020 Fixed: The online panel is not removed

Omnisphere 2. 6 Cpu Usage Guide

How to solve the problem with skinization and Russification of FL.All necessary and instructions in the distribution

What’s new:

Omnisphere 2. 6 Cpu Usage List

Changes
8500 Show warning when the user data folder is set to an invalid location
8501 ZGE Visualizer: added “BPM step” option to ImageMashup effect
Bugfixes
(common)
8466 Don’t show admin warning when FL VSTi is started
8490 Crash updating PDC delay lines
8475 Crash opening projects with demo plugins
8463 “Drive not found” crash at startup
8252 Crash updating the screen of the Fire
8452 Freeze when dragging “Save score as …” menu item over the playlist button in the main toolbar
8449 Echo Delay / Fat Mode pitch control doesn’t work with stretch when a time is set
8443 Adjusting properties of multiple notes in the piano roll doesn’t work well for “X” and “Y”
8214 Steps can be added after pattern length
8461 Toolbar can become glitchy if a specific point is clicked with the mouse wheel button
8455 Blood Overdrive: high CPU usage in 32 bits
8454 Distructor: high CPU usage in 32 bits
8456 Dashboard: do not show unregistrable plugins in detected problems section
8434 Fruity wrapper: opening presets for VST3 plugins from .vstpreset files doesn’t work
8500 Fruity Wrapper: crash with some plugins
8474 Fruity Wrapper: garbage characters in parameter names in Kontakt
8448 ZGE Visalizer: fixes and improvements to “Youlean Oscilloscope” and “Youlean Waveform”
8484 ZGE Visualizer: export failure when “Supersample” and “Uncompressed” options are both on
(macOS)
8493 Crash when the user data folder is set to a location that can’t be written to